1. What is Fluid Flow Rate Calculation?

Definition: This calculator estimates the volumetric flow rate of a fluid in gallons per minute (GPM) based on velocity and cross-sectional area.

Purpose: It helps engineers, plumbers, and technicians determine fluid flow rates in pipes, channels, and other conduits.

2. How Does the Calculator Work?

The calculator uses the formula:

Where:

• \( Q \) — Flow rate (gallons per minute)
• \( V \) — Velocity (feet per second)
• \( A \) — Cross-sectional area (square feet)
• 448.83 — Conversion factor (cubic feet per second to GPM)

Explanation: The velocity is multiplied by the cross-sectional area to get flow in cubic feet per second, then converted to GPM.

3. Importance of Flow Rate Calculation

Details: Accurate flow rate calculations ensure proper system design, pump sizing, and fluid handling in various applications.

4. Using the Calculator

Tips: Enter the fluid velocity in ft/s and cross-sectional area in ft². All values must be > 0.

5. Frequently Asked Questions (FAQ)

Q1: Why is the conversion factor 448.83?
A: This converts cubic feet per second to gallons per minute (1 ft³/s = 448.83 GPM).

Q2: What's a typical velocity for water in pipes?
A: Typically 2-5 ft/s for residential plumbing, 5-10 ft/s for industrial applications.

Q3: How do I calculate cross-sectional area?
A: For circular pipes: \( A = \pi \times (D/2)^2 \) where D is diameter in feet.

Q4: Does this work for any fluid?
A: Yes, but the velocity should be appropriate for the specific fluid's viscosity and density.

Q5: When would I need this calculation?
A: When designing piping systems, selecting pumps, or troubleshooting flow issues.